Generac 7260 22kw Air-cooled Whole Home Standby Generator

Features

• Financing options offer you solutions that meet your budget.
  Electronic fuel & ignition control optimizes fuel use for a more cost-efficient and lower emission back-up power solution.*
  *On average versus Generac Guardian Series standby generators.
  Long, best-in-class service intervals mean you spend less time on maintenance and more time enjoying the comfort that comes with owning a standby generator.
  Remote diagnostics monitor your generator’s performance and help detect issues before they become a problem, helping you save time & money on maintenance.
  Built-in Cellular Connectivity allows you to monitor performance and control your generator with Mobile Link whether you're home or away.
  Mobile LinkTM keeps you connected and provides real-time updates and maintenance alerts.*
  *Requires Mobile Link TM premium subscription
  Oil level sensors monitor oil level to help ensure generator readiness.
  Improved cold start performance enables generator start-up in cold climates.
  Sloped roof and rear air intake reduce risk of snow and ice intrusion.
  Compatible with ecobee by Generac thermostats and Generac PWRcell battery systems to seamlessly monitor & control your home’s energy.
  Every Generac Standby Generator comes with a 5-year limited warranty, and over 65 years of innovation behind it.
  24/7/365 Customer Support Team is ready all day, every day, from our headquarters in Wisconsin to answer any questions you might have.
  Generac generators and engines are engineered and assembled in the USA*.

What's in The Box

• 22kW Generac Air Cooled Standby Generator

Warranty

• 5 Year Limited Warranty
• 30 Day Satisfaction Gauranteed

SKUGNC-7260Model22 kWRated maximum continuous power capacity (LP)22 kW*Rated maximum continuous power capacity (NG)21 kW*Rated voltage240 VRated maximum continuous load current – 240 Volts (LP / NG)92 / 88Total Harmonic DistortionLess than 5%Main line circuit breaker100 ampPhase1Number of rotor poles2Rated AC frequency60 HzPower factor1.0Battery requirement (not included)12 volts, AGM Powersport Battery Group BTX20L 310CCA minimumUnit weight (lb / kg)451 / 205Dimensions (L x W x H) in / cm46.4 x 26.3 x 30.7 / 117.9 x 66.8 x 77.9Sound output at 23 ft (normal load)67 dB(A)Sound output at 23 ft (Quiet-Test mode)55 dB(A)Exercise durationAdjustable 5 - 20 min (5 min factory default)Engine typeGENERAC G-Force 1000 SeriesNumber of cylinders2Displacement997 ccCylinder blockAluminum w/ cast iron sleeveValve arrangementOverhead valveLifter typeHydraulicIgnition systemSolid-stateGovernor systemElectronicCompression ratio10.1:1Starter12 VDCOil capacity including filterApprox. 2.2 qt / 2.1 LOperating rpm3,600Fuel consumption Natural Gas 1/2 Load221 ft³/hr (6.27 m³/hr)Fuel consumption Natural Gas Full Load311 ft³/hr (8.80 m³/hr)Fuel consumption Liquid Propane 1/2 Load89 ft³/hr (2.45 gal/hr) [9.28 L/hr]Fuel consumption Liquid Propane Full Load135 ft³/hr (3.71 gal/hr) [14.03 L/hr]Controls AUTOAutomatic start on utility failure; programmable exerciserControls MANUALStart with starter control; transfers to load if utility failsControls OFFStops unit; no automatic start on utility failureControls SERVICEDiagnostic mode; prevents remote commands and nuisance notificationsReady to Run/Maintenance messagesStandardEngine Run Hours indicationStandardProgrammable start delay2–1,500 seconds (dealer programmable)Utility nominal voltage settingAdjustable 90–110% of 240V (default 100%)Utility Voltage Loss/Return to UtilityAdjustable 75–80% dropout / 84–89% pickupRun/Alarm/Maintenance logs50 events eachAutomatic Voltage Regulation with Over/Under Voltage protectionStandardUnder-Frequency/Overload/Stepper Overcurrent protectionStandardLow Oil Pressure/High Oil Temperature shutdownStandardAutomatically upgradable firmware via Cellular or Wi-FiStandardControls AUTOAutomatic start on utility failure; programmable exerciserControls MANUALStart with starter control; unit stays on; transfers to load if utility failsControls OFFStops unit; generator will not automatically start on utility failure; control and charger operate if utility is availableControls SERVICEFor diagnostic personnel use to prevent remote commands and nuisance Mobile Link notifications during testingReady to Run/Maintenance messagesStandardEngine Run Hours indicationStandardProgrammable start delay2–1,500 seconds (dealer programmable)Utility nominal voltage settingAdjustable 90–110% of 240V (default 100%)Utility Voltage Loss/Return to Utility (brownout setting)Adjustable 75–80% dropout / 84–89% pickupFuture Set Capable Exerciser/Exercise Set Error warningStandardRun/Alarm/Maintenance logs50 events eachEngine start sequenceCyclic cranking; engine cranks a maximum of five times at factory set intervals and durationsStarter lock-outStarter cannot re-engage until 5 sec after engine has stoppedSmart battery chargerStandardCharger Fault/Missing AC warningStandardLow Battery/Battery Problem Protection and Battery Condition indicationStandardAutomatic Voltage Regulation with Over and Under Voltage protectionStandardUnder-Frequency/Overload/Stepper Overcurrent protectionStandardSafety Fused/Fuse Problem protectionStandardAutomatic Low Oil Pressure/High Oil Temperature shutdownStandardOvercrank/Overspeed (@ 72 Hz)/RPM Sense Loss shutdownStandardHigh Engine Temperature shutdownStandardInternal Fault/Incorrect Wiring protectionStandardCommon external fault capabilityStandardAutomatically upgradable firmware via Cellular or Wi-FiStandard why buy from us? secure & hassle-free shopping

All items are covered by manufacturer warranty.

fast shipping

Most orders delivered in 1–3 business days.

customer service

Call us toll free: 1-800-629-3325

satisfaction guaranteed

All our sales are backed by a 30-day satisfaction guarantee.